|
| HOME | PRINT & DESIGN SPECS | QUOTE FORM |
| J-CARD, A.K.A. CASSETTE INSERT |
| IMPORTANT NOTICE: The diagram on this sheet may or may not be the correct size, it is for visual reference purposes only. DO NOT MEASURE THE DIAGRAM BELOW to come up with the dimensions for your J-Cards! Please adhere strictly to the numerical dimensions that accompany the diagram. They are the only acceptable dimensions for already cut and scored client provided J-Cards. |
|
| A Standard J-Card has 3 panels: | |
|
1: The Over-flap (sometimes referred to as the J-flap). 2: The Spine. 3: The Cover Panel. Optional: Extra Flaps ( printable panels ) can be added for an additional fee |
|
|
Dimensions of J-cards with 2 extra flaps (4 extra printable panels): If your project requires (2) two extra flaps the cut size width of Optional Extra flap # 1 changes to 2" and the cut size width of the Optional Extra Flap #2 is: 2 & 13/32." Dimensions of J-cards with 3 extra flaps (6 extra printable panels): If your project requires (3) three extra flaps, the cut size width of Optional Extra Flap # 1 is 2", while the cut size width of Optional Extra Flap # 2 is 2 & 7/16" and the cut size width of Optional Extra Flap # 3 is: 2 & 11/32". |
|
Artwork When setting up artwork for J-cards, you must allow a 1/8" bleed area around the image area of each and every panel for sizing and trim purposes. Any and all client submitted J-cards must be properly scored and (if extra flap type cards are submitted,) prefolded. When it comes to the type of paper to be used for printing J-cards, 7 point Card Stock is preferable. |
| HOME | PRINT & DESIGN SPECS | QUOTE FORM |
|
CONTACT US MAP |
913.262.5335
Toll Free 800.776.4096 EMAIL 7800 Shawnee Mission Parkway, Suite 17 Overland Park, Kansas 66202 |
| Copyright 2006 by RSRT, Inc. All Rights Reserved. Contact the Webmaster |